Author(s)

Yuge Du ¹

Affiliation(s)

¹ Northeast Forestry University, Harbin, China

Corresponding Author

Yuge Du

ABSTRACT

With the ongoing increase of urban traffic, the problem of highway crossing existing rail transit bridges is developing. This crossing project not only requires complicated building technology, but also faces enormous security challenges. Bridge project not only contains sophisticated building technology, but also faces considerable security risks. In this paper, Midas GTS NX software is used to calculate the additional displacement and track deviation caused by construction through finite element model, aiming at discussing the safety risk of highway crossing the existing rail transit bridge and putting forward the corresponding control scheme.

KEYWORDS

Rail transit; Bridges; Security hazards; finite element

CITE THIS PAPER

Yuge Du, Safety Risks and Control Technologies for Highway Bridges Crossing Existing Rail Transit. Journal of Civil Engineering and Urban Planning (2024) Vol. 6: 27-37. DOI: http://dx.doi.org/10.23977/jceup.2024.060304.

REFERENCES

[1] Qiao Honglei, Liang Zuquan, Geng Jianyi, et al.Construction impacts of urban rail transit tunnel mine method concealed excavation side penetration viaduct[J].Urban Rail Transportation Research, 2023, 26(11):127-131.
[2] Bai Haiwei, Wang Jianchen, Liu Yunliang.Micro-deformation control of existing tunnels with up-through construction based on stress balance[J].Journal of Underground Space and Engineering, 2021, 17(05):1569-1577.
[3] Tang Jiyi, Lin Ping. Analysis of vibration characteristics of multi-story buildings under the influence of urban rail transit viaducts [J]. Journal of Hebei Engineering University (Natural Science Edition), 2018, 35(02):80-85.
[4] Zhou Z.Numerical simulation and measured construction impact analysis of subway shield tunnel underneath existing high speed railway bridge[J].Urban Rail Transportation Research, 2023, 26(05):140-144+150.
[5] Zhou Li, Zhang Tianqi, Luo Yanyun, et al.0ptimization of parameters of "noise-reducing" dynamic vibration absorbers for urban rail transit viaducts[J].Journal of Central South University (Natural Science Edition), 2020, 51(06):1664-1672.
[6] S. Wang.Slope stability analysis method based on limit analysis finite element and strength discount method[J].Urban Rail Transportation Research, 2019, 22(03):51-55.
[7] Zhao Xiangping, Li Xiaochao, Gao Huarui, et al. Study on impact coefficient of PC continuous beams for urban rail transit considering the effect of track unevenness[J].Highway, 2020, 65(01):63-69.
[8] Chen Li, Diao Xinhong, Yang Shouxing, et al. Research on settlement control standard of roadbed under frame bridge crossing existing railroad[J].Modern Tunnel Technology, 2019, 56(02):111-118.
[9] Hu Songsong, Chen Gong, LI Panzhi. Research on seismic performance and design method of rail transit viaduct based on friction pendulum bearing[J].Urban Express Transportation, 2022, 35(03):95-100.
[10] Wang Shejiang, Zhao Lifeng, Huang Qiming, et al. Research on diaphragm wall construction method based on in-situ protection of power cables for existing rail transit operations across subway stations[J].Tunnel Construction(in Chinese and English), 2020, 40(S1):337-342.

Sponsors, Associates, and Links

---

• Journal of Sustainable Development and Green Buildings
  
  
• Landscape and Urban Horticulture
  
  
• Bridge and Structural Engineering
  
  
• Soil Mechanics and Geotechnical Engineering
  
  
• Journal of Municipal Engineering
  
  
• Heating, Ventilation and Air Conditioning
  
  
• Indoor Air Quality and Climate
  
  
• Computer Aided Architecture Design