Numerical Analysis of Coating Device based on Fluent
DOI: 10.23977/jemm.2018.31002 | Downloads: 41 | Views: 1600
Chen Zhe 1, Bai Ziyan 1, Chen Xinxuan 1
1 School of Construction Machinery, Chang’an University, Xi’an 71006, Shaanxi, China
Corresponding AuthorChen Zhe
According to the applicable conditions of coating quality of two different coating models in the extrusion coating of lithium battery, the flow state of the slurry in the inner flow channel of the extrusion die is simulated by Fluent software. The simulation results show that the coating uniformity of the two models basically meets the requirements. The FLUID1 die is superior to the FLUID2 die in terms of speed uniformity and loss. From the analysis of the uniformity of the outlet pressure, the FLUID1 pressure uniformity at the outlet is excellent with FLUID2.However, when considering the overall compression of the die, FLUID2 can also be selected. The suitable coating style depends on the different craft and coating skill.
KEYWORDSExtrusion coating, Extrusion die, Inner flow channel, Uniformity.
CITE THIS PAPER
Zhe, C., Ziyan, B., Xinxuan, C., Numerical Analysis of Coating Device based on Fluent. Journal of Engineering Mechanics and Machinery(2018) 3: 6-13.
 ZHOU Yunfu. Research on Lithium Power Battery Pole Piece Extrusion Coating Head [D].Southeast University, 2014.5.
 HE Wei. Flow Simulation of Coating Machine [D]. Hefei University of Technology, 2011.4.
 BAO Nengsheng, LIU Xiaoshan, MA Wan, etc. Numerical Calculation and Analysis on Roll Coating Process of the Clearance between Two Rollers [J]. Packaging Engineering, 2016(23):6-12.
 Kang H, Park J, Shin K. Statistical analysis for the manufacturing of multi-strip patterns by roll-to-roll single slot-die systems [J]. Robotics and Computer Integrated Manufacturing, 2014, 30(4):363-368.