Design of automatic press mounting machine for motor rotor bearing
DOI: 10.23977/jemm.2022.070111 | Downloads: 18 | Views: 388
Zheng Hong 1
1 Wenzhou Polytechnic, Wenzhou 325035, Zhejiang, Peoples R China
Corresponding AuthorZheng Hong
The automatic press fitting intelligent production line of motor rotor bearing is composed of three parts: loading and unloading mechanism, whole column positioning mechanism and press fitting mechanism; The design applies the mechanical principle of gear rack transmission, synchronous belt transmission, manipulator, gas-liquid booster cylinder, vibrating plate and fixture positioning, and presses the bearing into the journal of motor rotor to meet the working requirements of motor rotor parts.
KEYWORDSDesign of automatic press mounting machine for motor rotor bearing, Rack and pinion drive, Synchronous belt drive, manipulator, Gas liquid booster cylinder
CITE THIS PAPER
Zheng Hong, Design of automatic press mounting machine for motor rotor bearing. Journal of Engineering Mechanics and Machinery (2022) Vol. 7: 88-91. DOI: http://dx.doi.org/10.23977/jemm.2022.070111.
 Zheng Hong.Design and teaching feedback of switching steering transmission device in production line [J].Internal combustion engines and accessories. November 2022
 Zheng Hong.Design and teaching feedback of rotary load transfer transmission device on production line [J]. Value engineering. November 2022
 Zheng Hong.Design and teaching feedback of multi station angle steering transmission device in workstation [J].Internal combustion engines and accessories. November 2022
 Zhao Fan, Hu Zhenzhen, Hou Junpeng, Guo Jianhua.Computer simulation analysis of parameters of double overhead synchronous belt timing transmission system based on MATLAB [J].Journal of Qiqihar University (NATURAL SCIENCE EDITION). September 15, 2020
 Zhang Jianqiang, Chen Xing, Liu Zhipeng.Design of high-level bag stacker based on synchronous belt drive [J].Food and machinery. April 30, 2020