Application of Cast Steel and Carbon Nanotube Composites in Small Agricultural Machinery Castings
DOI: 10.23977/jemm.2023.080106 | Downloads: 20 | Views: 688
Author(s)
Yang Li 1, Liping Liang 1, Yongqi Wang 1, Xuefeng Zhang 1, Fazhan Yang 2
Affiliation(s)
1 Department of Mechanical and Electrical Engineering, Qingdao University of Technology(Linyi), Linyi City, Shandong, 273400, China
2 School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao City, Shandong, 266520, China
Corresponding Author
Yang LiABSTRACT
Carbon nanotubes are, under certain circumstances, a coaxial hollow tube-shaped nanoscale material because many carbon atoms converge in one place, with a vertical dimension of the order of nanometers and a lateral dimension of the order of micrometers. Carbon nanotube is one of the carbon isotope isomers, and it is also widely used in many aspects. This paper aims to investigate and analyze the application of cast steel and carbon nanocomposites in small agricultural machinery castings. In this paper, the structure, properties and preparation methods of carbon nanotubes are briefly introduced, and then the development of agricultural machinery in China is qualitatively analyzed. First, an experiment of cast steel and carbon nanotube composite materials is carried out, and then the threshold model is used to analyze the data on mechanization levels. The experimental results showed that when cast steel and carbon nanotube composite castings are used, the productivity of small agricultural machinery castings is clearly higher, and the level of agricultural mechanization has also been significantly improved. The total power of agricultural machinery, the power of large and medium-sized agricultural machinery, and the power of small agricultural machinery all have a significant single threshold effect on the proportion of grain-sown area, and the estimated threshold values are 5.641, 3.645 and 2.756, respectively.
KEYWORDS
Carbon Nanotubes, Composite Materials, Small Agricultural Machinery Castings, Chemical Vapor DepositionCITE THIS PAPER
Yang Li, Liping Liang, Yongqi Wang, Xuefeng Zhang, Fazhan Yang, Application of Cast Steel and Carbon Nanotube Composites in Small Agricultural Machinery Castings. Journal of Engineering Mechanics and Machinery (2023) Vol. 8: 45-60. DOI: http://dx.doi.org/10.23977/jemm.2023.080106.
REFERENCES
[1] He L, Hu S, Jiang L, Syed-Hassan SSA, Wang Y, Xu K, Su S, Xiang J, Xiao L, Chi H. (2017) Opposite effects of self-growth amorphous carbon and carbon nanotubes on the reforming of toluene with Ni/α-Al 2 O 3 for hydrogen production. International Journal of Hydrogen Energy, 42(21):14439-14448.
[2] Zhang S, Tong L, Jin Z. (2018) The road to chirality-specific growth of single-walled carbon nanotubes. National Science Review, 5(3):310-312.
[3] Pint C L, Alvarez N T, Hauge R H. (2017) odako growth of dense arrays of single-walled carbon nanotubes attached to carbon surfaces nano research. Nano Research, 2(7):526-534.
[4] Zhou J, Cao J, Zou Y. (2017) MoS2 nanosheets supported on reduced carboxylic multi-walled carbon nanotubes: An advanced catalyst for the hydrogen evolution reaction. Microelectronic Engineering, 176(MAY):89-93.
[5] Zaporotskova I V, Boroznina N P, Parkhomenko Y N, Kozhitov LV. (2017) Carbon nanotubes: Sensor properties. A Review. Modern Electronic Materials, 2(4):95-105.
[6] Yao X, Gao X, Jiang J, Xu C, Deng C, Wang J. (2017) Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites. Composites Part B Engineering, 132(Jan.):170-177.
[7] Han X, Wu X, Zhong C, Deng Y, Zhao N, Hu W. (2017) NiCo2S4 Nanocrystals Anchored on Nitrogen-Doped Carbon Nanotubes as a Highly Efficient Bifunctional Electrocatalyst for Rechargeable Zinc-Air batteries. Nano Energy, 31(Complete):541-550.
[8] Ma C Y, Zhong Y W, Li J, Chen CK, Gong JL, Xie SY, Li L, Ma Z. (2017) Patterned Carbon Nanotubes with Adjustable Array: A Functional Breath Figure Approach. Chemistry of Materials, 22(7):2367-2374.
[9] Nshimiyimana J P, Zhang J, Chi X, Hu X, Wu P, Liu S, Liu J, Chu W, Sun L. (2018) Large positive magnetoresistance in semiconducting single-walled carbon nanotubes at room temperature. RSC Advances, 8(19):10179-10184.
[10] Wei J, Qi W, Qu X, Wang L, Wei X, Zhu D, Yang K. (2017) Effects of charge and surface defects of multi-walled carbon nanotubes on the disruption of model cell membranes. Science of the Total Environment, 574(JAN.1):771-780.
[11] Wang K, He X, Linthicum W, Mezan R, Wang L, Rojanasakul Y, Wen Q, Yang Y. (2017) Carbon nanotubes induced fibrogenesis on nanostructured substrates. Environmental Science: Nano, 4(3):689-699.
[12] Alomar M K, Alsaadi M A, Hayyan M, Akib S, Ibrahim M, Hashim MA. (2017) Allyl triphenyl phosphonium bromide based DES-functionalized carbon nanotubes for the removal of mercury from water. Chemosphere, 167(Jan.):44-52.
[13] Luong J, Glennon J D, Gedanken A, Vashist SK. (2017) Achievement and assessment of direct electron transfer of glucose oxidase in electrochemical biosensing using carbon nanotubes, graphene, and their nanocomposites. Microchimica Acta, 184(2):369-388.
[14] Lei T, Pochorovski I, Bao Z. (2017) Separation of Semiconducting Carbon Nanotubes for Flexible and Stretchable Electronics Using Polymer Removable Method. Accounts of Chemical Research, 50(4):1096-1104.
[15] Gharaati S, Kargar H, Falahati A M. (2017) Tetrahydropyranylation of alcohols and phenols catalyzed by a new multi-wall carbon nanotubes-bound tin(IV) porphyrin. Journal of the Iranian Chemical Society, 14(6):1169-1178.
[16] Binbin Huang, Liyu Chen, Yan Wang, Liuzhang Ouyang, Jianshan Ye. (2017) Paragenesis of Palladium-Cobalt Nanoparticle in Nitrogen-Rich Carbon Nanotubes as a Bifunctional Electrocatalyst for Hydrogen-Evolution Reaction and Oxygen-Reduction Reaction. Chemistry - A European Journal, 23(32):7710-7718.
[17] Kodama T, Ohnishi M, Park W, Shiga T, Park J, Shimada T, Shinohara H, Shiomi J,KE Goodson. (2017) Modulation of thermal and thermoelectric transport in individual carbon nanotubes by fullerene encapsulation. Nature Materials, 16(9):892-897.
[18] Li W, Li F, Liu Y, Li J, Huo H, Li R. (2017) Hydrothermal synthesis of multi-walled carbon nanotubes@ Mo x W 1 x S 2 hybrid as non-noble metal electrocatalyst for hydrogen evolution reaction. International Journal of Hydrogen Energy, 2017, 42(30):18774-18784.
[19] Ng B J, Putri L K, Tan L L, Pasbakhsh P, Chai SP. (2017) All-Solid-State Z-Scheme Photocatalyst with Carbon Nanotubes as an Electron Mediator for Hydrogen Evolution under Simulated Solar Light. Chemical Engineering Journal, 316(Complete):41-49.
[20] Abbasi M. (2017) Synthesis and characterization of magnetic nanocomposite of chitosan/SiO2/carbon nanotubes and its application for dyes removal. Journal of Cleaner Production, 145(MAR.1):105-113.
[21] Chawla N, Chamaani A, Safa M, El-Zahab B. (2017) Palladium-Filled Carbon Nanotubes Cathode for Improved Electrolyte Stability and Cyclability Performance of Li-O2 Batteries. Journal of the Electrochemical Society, 164(1):A6303-A6307.
[22] Li Z, Wang Q, Liao W, Wei G, Li W, Jiang H, Ding W. (2017) Microstructure and mechanical properties of the carbon nanotubes reinforced AZ91D magnesium matrix composites processed by cyclic extrusion and compression. Materials Science & Engineering A, 689(Mar.24):427-434.
[23] Choi S W, Kim J, Byun Y T. (2017) Highly sensitive and selective NO2 detection by Pt nanoparticles-decorated single-walled carbon nanotubes and the underlying sensing mechanism. Sensors & Actuators B Chemical, 238(Jan.):1032-1042.
Downloads: | 7612 |
---|---|
Visits: | 233652 |
Sponsors, Associates, and Links
-
Cybernetics and Mechatronics
-
Digital Manufacturing and Process Management
-
Ultra-Precision Machining Process
-
Journal of Robotics and Biomimetics
-
Prognostics, Diagnostics and Health Management
-
Micro-Electro-Mechanical Systems
-
Journal of Precision Instrument and Machinery
-
Engineering and Solid Mechanics
-
Fracture and Damage Mechanics
-
Frontiers in Tribology
-
Fluid and Power Machinery
-
Chemical Process Equipment
-
Journal of Assembly and Manufacturing
-
Mechanical Vibration and Noise