Design of Sandblasting Machine for Renovating Oil Barrel Based on PLC
DOI: 10.23977/jemm.2017.21007 | Downloads: 54 | Views: 2957
Xie Junqiang 1, Wang Zhongmin 1
1 Institute of Robotics and Intelligent Equipment, Tianjin University of Technology and Education, Tianjin, China
Corresponding AuthorXie Junqiang
To meet the requirements of steel barrel renovation, a set of oil barrel renovation production line based on PLC is used, where sandblasting machine is a part of this production line. By using sand blasting method, it designs a sandblasting mechanism and its corresponding control system based on PLC. It automatically realizes sandblasting derusting, dust processing through the sandblasting machine. Advantages of the machine are that reducing the working strength and improving the working environment. Simulations modeling and experiments show that the design scheme is better and its renovating efficiency is high.
KEYWORDSOil barrel, renovating, sandblasting machine, PLC.
CITE THIS PAPER
Junqiang, X. , Zhongmin W. Design of Sandblasting Machine for Renovating Oil Barrel Based on PLC. Journal of Engineering Mechanics and Machinery (2017) 2: 40-44.
 LIANG Suiping. Open Sandblasting Machine Technology and Environmental Transformation[J]. METALLURGICAL COLLECTIONS. 2015(4): 40-42.
 ZHOU Xiaojun, HAN Yanfeng, WANG Fayong. Study on the Mechanism and Parameter Optimization of Derusting by Sandblast[J], SHIP ENGINEERING, 2008, 1(30): 66-68.
 ZHANG Haifeng, WANG Weihua, ZHAO Ailing, etc. Research and Design of Wet Sand-Blasting Device[J], MACHINE TOOL & HYDRAULICS, 2015, 43(10): 46-52.
 ZHANG Yandong, XIANG Guilin, LIU Zhiping. Design and Application of OCTG Interal Wall Blasting Machine[J]. PIPELINE TECHNIQUE & EQUIPMENT. 2015(2): 40-42.
 LONG Bin, LV Xijun, TANG Deyu, etc. The Development and Application of Environmental Protection Fully Automatic Pipeline Blasting and Blasting Machine[J]. PETROLEUM ENGINEERING CONSTRUCTION. 2011(2): 36-38.