Author(s)

Chen Guangsheng ¹

Affiliation(s)

¹ University of Shanghai for Science and Technology, Shanghai, 200093, China

Corresponding Author

Chen Guangsheng

ABSTRACT

With the rapid development of intelligent manufacturing technology and the rapid iteration of knowledge, the problems of traditional teaching methods, teaching contents and evaluation methods have become increasingly prominent for Numerical Control Technology course, and the new teaching mode reform needs to be carried out urgently. First, focusing on the professional training direction under the background of intelligent manufacturing, the goal of curriculum construction and strengthen the construction of engineering connotation should be established. Following the principle of keeping up with the frontier and advancing appropriately, engineering knowledge, highlight practical teaching and pay attention to the cultivation of innovative ability should be renew. Information-based teaching assistant platform and innovating autonomous learning mode and integrating curriculum ideology, politics to improve the quality of education should be built, and school-enterprise cooperation and implementing the training mode of integration of production, teaching and research were carried out.

KEYWORDS

Numerical Control Technology course; Reform Path; Intelligent Manufacturing; Quality of education

CITE THIS PAPER

Chen Guangsheng, Reform Path of 'Numerical Control Technology' Course of Mechanical Specialty in Universities under the Background of 'Intelligent Manufacturing'. Advances in Educational Technology and Psychology (2025) Vol. 9: 75-79. DOI: http://dx.doi.org/10.23977/aetp.2025.090212.

REFERENCES

[1] Dong Kai. Interpretation and Trend Judgment of the "14th Five-Year" Intelligent Manufacturing Development Plan. China's Industry and Informatization. 2022 (01): 26-29.
[2] YANG Shujie. Exploration of Ideological and Political Education in CNC Technology Professional Training Courses Based on OBE Concept. Agricultural Technology & Equipment.2023. 5 (50):78-81.
[3] Zhao Wenhui, Yang Heran, Sun Xingwei, Li Shanshan, Zhao Haining, Teaching reform practice of numerical control technology based on emerging engineering. Journal Of Machine Design,2020.11: 265-267.
[4] Wang Dou, Wang Wen, Fu Weiping, Si Yue, Gao Zhiqiang. Computer Numerical Control Technology Teaching Reform Based on OBE and Blended Teaching Mode. China's modern educational equipment, 2024.7(437):96-98.
[5] Xu Aijun. Reform and Practice of Project-based Teaching of Numerical Control Technology Based on School-enterprise Cooperation. Modern Rural Science and Technology. 2024.2: 126-128.
[6]Zhao Ziqi, Shi Yong, Gao Zebin, etc.al. Practice and Reflection on Blended Teaching of Numerical Control Technology Course. Agricultural Technology & Equipment. 2024,1(409):109-112. 

Sponsors, Associates, and Links

---

• Curriculum and Teaching Methodology
  
  
• Transactions on Comparative Education
  
  
• Applied & Educational Psychology
  
  
• Advances in Vocational and Technical Education
  
  
• Adult and Higher Education