Education, Science, Technology, Innovation and Life
Open Access
Sign In

Numerical Simulation of Construction Process of Large Building Project Based on Discrete Element Method

Download as PDF

DOI: 10.23977/engsm.2019.11001 | Downloads: 16 | Views: 3856

Author(s)

Wang Peng 1

Affiliation(s)

1 School of Economics and Management, Dalian University, No.10, Xuefu Avenue, Economic & Technical Development Zone, Dalian, Liaoning, The People's Republic of China (PRC)

Corresponding Author

Wang Peng

ABSTRACT

Assembling integrated concrete cutting construction technology is a kind of construction engineering means commonly used in large stadiums at present. The advantage of this method lies in that it is connected by reinforcing bars, connecting pieces or applying prestress and pouring concrete members on site, which significantly enhances the mechanical resistance of construction engineering. And milling and planing machine as a large stadium assembly integrated concrete cutting construction indispensable important engineering machinery, its demand continues to grow, domestic independent research and development of high-performance milling and planing machine is urgent. Based on three-dimensional discrete element method model conforms to the macroscopic mechanical properties of the road, establish milling planer operation simulation model of quantitative stadium assembled monolithic concrete construction process of milling planer cutting resistance, using uniaxial compression and splitting tensile test to determine the compressive modulus of asphalt concrete pavement and tensile modulus, obtain the macro level check micro contact connection parameters. Discrete element specimens with coarse aggregate of irregular shape are generated by using the algorithm of 3d discrete element software PFC3D. Through the establishment of kinematics model, the critical condition expression of vibration planer is deduced, and the improvement of the working process force by adding different vibration modes is studied, so as to calculate the optimal combination value of vibration planer amplitude and vibration frequency, and obtain the better vibration mode of milling planer.

KEYWORDS

Large stadiums, Assemble integrated concrete, Cutting construction, The numerical simulation

CITE THIS PAPER

Peng Wang, Numerical Simulation of Construction Process of Large Building Project Based on Discrete Element Method, Engineering and Solid Mechanics (2019) Vol. 1: 1-5. DOI: http://dx.doi.org/10.23977/engsm.2019.11001.

REFERENCES

[1] Rajan Varadarajan. (2018) Concrete pump displacement measurement method based on pumping pressure, ACS Applied Materials & Interfaces, 42, 108-122.
[2] Andrea Schenker‐Wicki. (2017) Flexible multi-body dynamics modeling and simulation of concrete pump truck boom, ACTA MECHANICA SINICA, 1, 105-138.
[3] Robert J. Allio. (2019) Robustness to uncertain optimization using scalarization techniques and relations to multiobjective optimization. Applicable Analysis, 1, 119-136.

Downloads: 16
Visits: 3856

All published work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright © 2016 - 2031 Clausius Scientific Press Inc. All Rights Reserved.